4-Channel, Installation-Grade, Constant Voltage LED dimmer

Robust and reliable, ENTTEC’s CVC4 is the ultimate high fidelity, constant voltage (CV) LED dimmer. Prepare to take your CV projects to the next level!

FeaturesVideoTutorialsDownloads

$125.00 +GST

SKU: 73925
Robust and reliable,
ENTTEC’s CVC4 is the ultimate high fidelity, constant voltage (CV) LED dimmer.
Constant Voltage LED Dimmer

The CVC4 is the next evolution of the ENTTEC constant voltage LED dimmer, building upon the CVC3 and DIN-LED4PX. Think of the CVC4 as a higher power version of these popular models, with the added option for 16-bit dimming, plus the ability to configure it to take up the same channel footprint as a CVC3 in an existing application if you wish.

Capable of controlling up to 5A on each of its four channels at either a 16- or 8-bit resolution, the CVC4’s ultra smooth-dimming, auto-addressing functionality and simple mode selection make it one of the most comprehensive yet versatile devices imaginable.

With rugged, in-built surface-mount tabs, it’s easy to install, whilst its solid-state, fanless design means that the CVC4 is virtually silent when in operation. In addition, the CVC4 incorporates a user-serviceable blade fuse to protect against short circuits. And also features the ability to limit the output to reduce overheating. The CVC4 has been engineered to bring the ultimate in installer-friendly flexibility and fast deployment when constructing a constant voltage LED strip project.

 

In a nutshell

  • 12-24V input (20A maximum).
  • Output to LED strip (5A per channel maximum).
  • Huge 1KHz PWM signal refresh rate.
  • PLink in and out connector for auto-addressing (each unit can be spaced up to 300m away from the next when using PLink over Cat6 cable).
  • Single DMX connector for DMX/RDM input, or chaining between devices.
  • Status LED and mode selection DIP switch to toggle between bitrate and RGB/RGBW operating modes.
  • User-serviceable fuse to protect against short circuits.
  • Passive cooling with internal overheating protection.
  • Compact design with integrated 4mm surface mounting holes.
Constant Voltage LED Dimmer

Special features

Auto-addressing

This priceless function speeds up installation time as well as working intuitively for installers, even if completely unfamiliar with DMX. Simply connect your CVC4s using PLink protocol, add power, and the CVC4s will all auto-address themselves. More advanced users can also address and monitor each CVC4 using RDM.

Configurability

16-bit dimming is increasing in popularity and allows for users to have much finer control over their installation. The mode selection DIP switches allow users to choose between either 16 or 8-bit resolution. Simply pick your desired bitrate, select from either RGB or RGBW LED strip, then you’re all set!

Safety fuse

Installing fuses to ensure that a system is safe takes up a great deal of time on site and can add to the space required per dimmer. To combat this, the CVC4 integrates a user-serviceable 20A ATO blade fuse that can be sourced easily and inexpensively to protect against dead shorts. If your installation draws less than 20A you can downrate the fuse to an appropriate level to suit your installation. To learn how to replace the CVC4’s fuse, check out our short instructional video in the download section below.

Overheating protection

If the CVC4 ever reaches a high operating temperature, it will automatically reduce its output by 50% to prevent overheating and blink the LED Indicator red to notify the user until the device has sufficiently cooled.

Backward compatible with the CVC3 + DIN-LED4PX

Given the CVC4’s range of operating modes and flexibility to accept DMX or PLink data, it is fully backward compatible with the DINLED-4PX and CVC3.

Designed for longevity

MOSFETs are used to dim the LEDs wired to the CVC4’s output. During operation, it’s normal for these components to heat up. So that this device can run safely at a sustained temperature, our engineers have ensured that all MOSFETs are directly bonded to the metal casing in order to transfer heat outside the unit to better regulate its performance. Be wary of many cheap OEM products that do not allow these components to dissipate heat correctly, severely risking the safety and reliability of your project.

3-year warranty

ENTTEC are proud to back up the confidence in our research, engineering and quality control with a 3-year manufacture defect warranty on this product.

Let’s get stuck in!

How much CV strip can the CVC4 control?

 

There are many variables to take into consideration when calculating such a figure, not least the precise specifications of LED strip you are connecting to it. ENTTEC offers a comprehensive range of RGB, RGBW, white, and colour temperature adjustable (CTA) constant voltage (CV) strips to cover a large variety of potential requirements.

Our engineers have tested all currently available ENTTEC models and established that a single CVC4 unit will comfortably control anywhere from 17m of high output RGBW Strip (ENTTEC 9VLW) up to 29.5m of White LED Strip (ENTTEC 9CH) – calculated to allow for a 10% voltage drop & cabling overhead.

You’ll find details on how to calculate the maximum run length for your chosen type of CV strip within our CVC4 Installation Guide, downloadable below.

Note: the guide figures above refer to the maximum capacity that the CVC4 itself can control and do not factor in any limitations of each strip type (e.g. power re-injection or limitations of continuous run length. Of course, you are always very welcome to contact us if you need any help to determine the best setup combination for your project).

Constant Voltage LED Dimmer
Constant Voltage LED Dimmer

Applications

  Constant voltage (CV) LED strips are a highly flexible and customisable light source, making them perfectly suited for many different types of lighting applications. Unlike traditional lighting, an LED strip can bend, flex and adapt to fit any installation’s needs.

The CVC4 changes relative brightness of each channel in order to produce different colours and effects. What’s more, its comparably high PWM rate (1KHz) means that if the LED strip it is controlling is filmed, it will not appear to flicker in recordings in the way that those controlled by LED dimmers with a lower refresh rate do, making it the ideal device for television studio installations or indeed any space you want to look stunning at the receiving end of a film camera or social media video.

ENTTEC’s PLink protocol has been especially designed to extend your LED pixel or Constant Voltage layout over long distances.

With their compact installation footprint, you can use a series of PLink Injectors to convert PLink data from your Pixelator, Pixelator Mini or Pixelator Mini PX1-8D allowing you to easily control LED pixel tape or pixel dots up to 300 metres away over standard CAT 6 cable.

Alternatively, use an ENTTEC CVC4 to control Constant Voltage (CV) LED tape using the same method!

How do I wire my CVC4 up?

The diagrams here provide a general view of several of the CVC4’s core setup concepts. In particular, you’ll see how easily the CVC4 can be integrated directly with a PIXELATOR system without having to convert to DMX first, unlike the case with other off-the-shelf LED dimmers. So many possibilities! For more detailed information regarding project requirements of different scales and types, please consult the Installation Guide in the download section below.

Specifications + downloads

Documents

Firmware

Visuals

Maintenance

Constant Voltage LED Dimmer

CVC4 is compatible with:

 

  • Compact and powerful DIN-Rail Ethernet pixel converter, that can drive up to 8,192 channels (2,730 RGB Pixels).

    Pixelator Mini PX1-8D

    $700.00 +GST
    Buy Now
  • The RGBW LED strip provides ultimate RGBW output and is designed and produced to the highest ENTTEC quality standards.

    RGBW LED tape (10m)

    $350.00 +GST
    Buy Now
  • RGB LED tape (10m)

    $310.00 +GST
    Buy Now
  • Ethernet Pixel controller

    An 8-port Ethernet-pixel controller, the Pixelator Mini is a compact version of the Pixelator. Powerful enough to control up to 8,192 channels (2,730 RGB Pixels) with perfect synchronisation across all eight of its outputs.

    Pixelator Mini

    $800.00 +GST
    Buy Now
  • Ethernet-to-Pixel converter

    World’s most powerful Ethernet-to-pixel protocol converter. With its high-speed network connection and rugged rackmount enclosure, the Pixelator can control an impressive impressive 24,576 channels (8,192 RGB pixels).

    Pixelator

    $2,100.00 +GST
    Buy Now
  • DIN-Rail DMX-Artnet node

    DIN-Rail DMX-Artnet node that provides 1 universe of bi-directional DMX to Ethernet conversion, perfect for distributing DMX signals over a network.

    DIN-ODE Mk2

    $315.00 +GST
    Buy Now
Categories: , , , , , ,